Deluxe Kit shown

Daewoo Automatic Transmission Overhaul Kits

 

Detailed Application Guide

We offer a complete line of professional overhaul kits for your automatic transmission . We have a complete line for most import manufactures here we offer information and parts to repair three different Daewoo automatic transmission problems. We offer overhaul kits that includes all paper and rubber products, o-rings seals, metal clad seals, gaskets and clutch frictions for 3 different Daewoo model automatic transmissions. We can provide clutch steels kits, filter kits, torque converters and in most cases troubleshooting and overhaul guides and other hard parts.

We offer parts for the Daewoo Lanos transmission model 4T40-E, the Daewoo"Leganza 4 Cyl. transmission model "AW50-40LE ", and the Daewoo "Nubria transmission model 4T40-E ".
Doing the work yourself or supply these quality parts to your mechanic and you save money!

Listed below you will find a detailed application guides listing vehicle manufacture information. Easy to use, selecting your vehicle transmission model for table on the right will take you to a detailed application listing of parts for various model and years of manufacture. Select the kit number for your application and add to our secure shopping cart. Information is supplied to assist you in identifying specific part number for the parts kit necessary to assist you with your overhaul or maintenance efforts. In some cases we can also supply additional hard parts to assist you, if you don't see the parts you need just give us a call, at times we can even supply good used hard parts to save you additional money.

So the next time you need to repair your Daewoo automatic transmission remember - all overhaul kits are not the same - you can never make a bad decision by choosing the best.


Use the same parts as professional mechanics & get professional results!

The correct parts at the right price the first time.
 

Daewoo model and transmission model number
Lanos 4T40-E Leganza 4 Cyl. AW50-40LE Nubria 4T40-E

We suggest that you start with our professional troubleshooting and overhaul manual. This is the same manual you will find in most major transmission shops. These are model number specific and typically include 50 to 85 pages of detailed information, drawings, schematics and specifications. Detailed trouble code information that you can get from your vehicles on-board computer are explained, review of this data will give you a good idea as to the probable cause of the automatic transmission problem. Even if you don't do the work yourself the knowledge you gain may keep you from being ripped off at local transmission shop.


If you have particles in the pan of the transmission you can be sure that the same contamination can be found in the cooling system at the bottom of the radiator. With your overhaul parts you should also purchase two cans for radiator cooling system flush and completely purge out all contamination in the cool hoses both output and return as well as the radiator reservoir.

It is also recommended that you replace the torque converter, as it is difficulty to clean and purge out the contamination surely to be inside the torque converter.


Torque Converter Installation Tips   Auxiliary Transmission Fluid Cooling system
Overhaul Tips   Fluid Additive
     
Be sure to use our transmission cooling line flush in order to remove debris. Your cost is $11.88 order Kooler Kleen.  

Go directly to the store

This is an abbreviated list and other parts are available. If you need something that is not listed just let us know .

Vehicle, Model, Transmission Model Part Number   Description Detailed Description Year Core Deposit

Your Cost

Add to Cart
Lanos 4T40-E MRK4200-S   Banner Kit Lanos 1999-On Transmission code 4T40-E This kit includes all paper and rubber products, o-rings seals, metal clad seals, gaskets and clutch frictions (clutch steels kit not included). Actual parts varies by transmission type. 1999-On  

$329.56

Add to cart
Quantity

Lanos 4T40-E K4200-9   Steel Clutch Kit 1999-On Transmission code 4T40-E This kit includes all clutch steels. Actual steels vary by transmission type. 1999-On  

$83.40

Add to cart
Quantity

Lanos 4T40-E 42600   Filter 1999-On Transmission code 4T40-E This kit includes the filter only, if you need pan gasket or oring order separately. 1999-On  

$18.52

Add to cart
Quantity

Lanos 4T40-E C55B   Torque Converter 1.6lt Lanos Dia. 10.25" Pilot .825" Hub 1.787" with bushing, mount 3 pad , 27 spline, Code FAFB high stall: solid graphite clutch, strategy 1. Remanufactured & tested in USA, to ensure the correct part please provide code off original torque converter at time of the order. These torque converters have a 90-day material & workmanship warranty. 1996 up $100.00

$174.90

Add to cart
Quantity

Leganza 4 Cyl. AW50-40LE K8800A-S   Banner Kit Leganza 4Cyl. 1999-On Transmission code AW50-40LE This kit includes all paper and rubber products, o-rings seals, metal clad seals, gaskets and clutch frictions (clutch steels kit not included). Actual parts varies by transmission type. 1999-On  

$380.16

Add to cart
Quantity

Leganza 4Cyl. AW50-40LE K8800A-9   Steel Clutch Kit 1999-On Transmission code AW50-40LE This kit includes all clutch steels. Actual steels vary by transmission type. 1999-On  

$119.72

Add to cart
Quantity

Leganza 4Cyl. AW50-40LE 88600K   Filter 1999-On Transmission code AW50-40LE This kit includes the filter only, if you need pan gasket or oring order separately. 1999-On  

$17.16

Add to cart
Quantity

Nubria 4T40-E MRK4200-S   Master Overhaul Kit Nubria 1999-On Transmission code 4T40-E This kit includes all paper and rubber products, o-rings seals, metal clad seals, gaskets and clutch frictions (clutch steels kit not included). Actual parts varies by transmission type. 1999-On  

$392.56

Add to cart
Quantity

Nubria 4T40-E K4200-9   Steel Clutch Kit 1999-On Transmission code 4T40-E This kit includes all clutch steels. Actual steels vary by transmission type. 1999-On  

$83.40

Add to cart
Quantity

Nubria 4T40-E 42600   Filter 1999-On Transmission code 4T40-E This kit includes the filter only, if you need pan gasket or oring order separately. 1999-On  

$11.52

Add to cart
Quantity

Minimum Order $25.00

Our Torque Converters are remanufactured & tested in USA, to ensure the correct part please provide code off original torque converter at time of the order. These torque converters have a 90-day material & workmanship warranty. Our torque converters are remanufactured to the highest industry standards, we use hardened steel hubs,Raybestos clutch linings and Torrington bearings. All hubs, bearings, washers, o-rings,roller clutches, bushings and clutch linings are replaced. 100% Quality inspections are conducted at each critical phase of the production cycle each converter is pressures tested, and computerized balance before shipment. Call with code off your existing torque converter and we can provide a quotation.

Maintenance Tips

Regular maintenance cycles and continued checking of fluid levels is critical to the life of your transmission. Operating temperature is the single most critical parameter effecting the life of the transmission. Keep the temperature down and fluid fresh helps the units typically last a very long time under normal driving conditions.We can supply a couple of aftermarket products to help you get the most out of your transmission:

Auxiliary Transmission Oil Cooler.

We can provide the Truco auxiliary transmission oil cooler for you vehicle it is an excellent auxiliary oil cooler that provide additional cooling capacity. The kit includes all parts required to mount the unit and connect to existing cooling lines. This is a typical do it yourself project. The unit typically mounts in front of the radiator. Your cost on this transmission life saving product varies by vehicle model and typically start at $54.94 plus shipping and handling.

Fluid Additive

Generally we don't recommend additives but we have found that the Lubegard "Automatic Transmission Protectant" at only $13.93 + S&H can:

Always consult and follow owners manual for maintenance intervals and requirements.



Overhaul Tips

Before you tear into the transmission, we suggest you first study the troubleshooting manual, add a bottle of our "Automatic Transmission Protectant" and put a few miles on the vehicle. This just might free valves and governors that are possible stuck in valve bodies. Be sure to get computer trouble code(s), see owners manual for technique to acquire malfunction codes. This will be a great assistance in diagnosing possible problems.

Twenty-One Steps to Successful Transmission Repair:

1) Do your research locate any technical bulletins pertaining to your transmission,ask your dealers parts department for bulletins.

2) Clean the entire transmission, including the valve body.

3) Check pump, valve body and case for warpage.

4) Flat file pumps, valve bodies, and cases. Just a few strokes with the file to knock off high spots and handling burrs.

5) Check all pump gear clearances.

6) Check planet pinion end play and side to side motion.

7) Soak all planet assemblies.

8) Soak all friction materials for 15 - 30 minutes.

9) Make sure all steels are in usable condition or replace. Do not sand or tumble steels when used against High Energy friction materials.

10) Inspect all surfaces upon which a band will ride.

11) Replace all rotating oil control rings.

12) Check all oil control rings and rubber products in the bores for proper fit.

13) Check all major support bushings and bushings that control lub oil.

14) Pre-lubricate all bushings and thrust washers.

15) Pre-lub pumps.

16) Pre-fill torque converter.

17) Use available manuals to ensure proper specifications and clearances.

18) Set correct clutch and band clearances.

19) Take the time to set the total end play.

20) Use a torque wrench on all pumps and valve bodies.

21) Always double flush the cooling and cooling return lines to the radiator to remove particles trapped there.

Take your time, take your time, take you time


Torque Converter Installation Preparation

Many torque converter problems can be avoided with proper preparation:

1) Pre-thread converter bolts by hand to make sure there is no sign of stripped threads.

2) Check and clean crankshaft thoroughly. Change crank spacer (if applicable).

3) Use 320 grit sandpaper or Emory cloth to remove any metal shavings on crankshaft.

4) Check converter for any damage that may have occurred during shipping.

5) Pre-fill converter with a minimum of (1) quart of transmission fluid.

6) Clean all paint off the pilot using 320 grit emory cloth.

7) Apply grease, not transmission gel, on the pilot.

8) Check flexplate for cracks and be sure there is no more than .006" runout.

9) Make sure all engine dowel pins are in place and clean.

10) Make sure all electrical ground straps are properly connected.

11) Never, Never us an impact gun to install torque converter bolts. Driving bolt into the converter cover will create a dimple on the lockup apply surface. Lockup clutch failure will occur when the lockup piston applies against and uneven surface. Grinding off one thread length from all lockup converter bolts is recommended to avert this type of failure.


In addition to the automatic transmission overhaul kits and repair parts offered here for Daewoo vehicles listed here, we also provide an impressive list of automotive after market products, parts and accessories that include manual transmissions and manual transmission parts and high performance clutch replacement kits. Watch for future additions of new products to be added to our on-line catalog including advanced wheels, tires, engine tune-up kits and other accessories.

If it's a part and or component under your vehicle we can supply it!

To order just add item to your shopping cart, our cart is secure, we protect your personal information and will not sell or abuse your email address. Want to purchase a part or remanufactured transmission and need additional information contact a knowledgeable technician .at 1-800-216-1632. You can also contact us by email.

Our Simple Sales and Return Policy.

Importdrivetrain.com is a division of Drive Line Service of Las Vegas

You can call the order desk at 1-800-216-1632, talk to a knowledgeable technician.

Considering purchasing parts from imprortdrivetrain.com and have questions contact Tech line at 1-702-876-3100 or e-mail.
Drivetrain Specialists of Las Vegas - Las Vegas NV, 89102